“In over 20 years of training, this was one of the best courses I’ve ever attended.”
Home » Work Health and Safety Training Courses in Perth » 10830NAT Silica Awareness Perth
** NOTE: Training for this course is only available for delivery Face to Face (F2F). Call to check for funding eligibility**
Approximately half the compositions of earth’s crust are silicon dioxide. Crystalline Silica is a basic component of soil, sand, granite and also found in stone, grout, bitumen, rock, gravel, glass, cement and clay and engineered stone.
Cristobalite and Tridymite are two other forms of crystalline silica. All three forms may become respirable size particles when workers chip, cut, drill, or grind objects that contain crystalline silica. Silica is a generic term commonly used to refer to crystalline silica including crystalline quartz.
Silica has been a long standing health hazard, as far back as early civilisation, causing millions of cases of disease and deaths since stone masonry and mining began.
The impact of working with respirable crystalline silica is a topical issue that is receiving increasing attention due to the rising numbers of affected workers. Australia and other countries are witnessing a resurgence in diagnoses of silicosis disease in workers in mining, construction and now those who work with engineered stone.
This course is now mandated by legislation in WA, (more info click here) along with the White Card and 11084NAT Course in Asbestos Awareness, to enter a construction site. See WorkSafe WA training requirements here for Asbestos Awareness.
Silica is widely encountered in extractive industries, in the manufacturing of many concrete based building materials. Typical industries include but not limited to:
According to Work Health and Safety Regulation 2011, PCBUs have an obligation to ensure that all workers who they believe may work with asbestos or asbestos-containing materials (ACMs) attend an approved course in asbestos awareness.
WorkSafe ACT currently requires workers to complete the 11084NAT Course in Asbestos Awareness (previously 10675NAT) and CPCWHS1001 Prepare to work safely in the construction industry. 10830NAT Course in Crystalline Silica Exposure Prevention is now mandatory for most construction industry participants working in the ACT. Inspectors are regularly visiting worksites and heavy fines may apply if you are found without this ticket. At best you will need to stop work immediately until you have the required training. Certain trades like sparkies and plumbers also will require 10852NAT Course in working with Asbestos containing materials.
Since 1 September 2024, WA introduced new regulations for crystalline silica substances (CSS) under the WHS (General) Regulations 2022. While accredited training is not yet mandated in the same way as the NT, employers in WA must ensure workers are trained and competent when undertaking high-risk crystalline silica tasks.
Gain the nationally recognised 10830NAT – Course in Crystalline Silica Exposure Prevention right here in Perth and across Western Australia. This half-day, face-to-face course is delivered via live webinar and equips you to identify and manage workplace hazards related to crystalline silica exposure—ensuring worker safety, compliance with WA WHS laws, and healthier lives for those in high-risk industries.
Crystalline silica is present in engineered stone, concrete, bricks, tiles, mortar, and natural stone. Cutting, drilling, or grinding these materials releases respirable crystalline silica (RCS)—a fine dust that can cause:
This course provides the skills and knowledge to manage these risks effectively, aligned with WA’s silica regulations and WorkSafe WA guidance.
This course is essential for:
By completing the 10830NAT course, participants will be able to:
Yes, via live webinar OR face-to-face in Perth/onsite across WA.
Accredited training is strongly recommended for high-risk crystalline silica work. Under WA’s regulations, PCBUs must ensure workers are trained and competent when working with silica.
Pricing starts at $397 per participant. Group pricing available on request.
Don’t wait—silica awareness is not just best practice, it’s becoming a regulatory requirement. Protect your workforce and safeguard your business by enrolling in the 10830NAT Silica Awareness Training today.
Book now or call our Perth-based team on 1800 900 222.
“In over 20 years of training, this was one of the best courses I’ve ever attended.”
“Great! The instructor made it interesting and enjoyable”
” We heard that AlertForce delivers one of the best courses around so the boss decided to send me to Australia from New Zealand.”
“I liked the trainer’s positive outlook and uplifting approach towards completing the long day.”
“Very competent training course. Trainer was very knowledgeable on subject.”
“AlertForce provided an excellent trainer, knowledgeable on the topic and allowed for active questioning.”